JL/JE Series Manual/Electric High Lift Trucks

Introduction of high lift truck

High lift truck is a new design with larger piston to offer you real 1000kg and 1500kg capacity. This series JL are manual high lift pallet jack and JE are electric high lift truck. It is very suitable as transpallet manuale combinato e tavola elevatrice. Con la calda impugnatura ergonomica, è molto semplice e comodo da usare. Inoltre, le gambe di supporto anteriori e gli stabilizzatori regolabili si estendono automaticamente al suolo con il sollevamento della forcella, che può garantire la massima stabilità e una frenata ottimale. Può mantenere la stessa velocità indipendentemente dal carrello con o senza carico.

This high lift pallet trucks can lift the pallets loading or unloading to the height you need. they can be used in various applications like factory, workshop, warehouse etc.

The manual high lift pallet truck has model: JL5210, JL6810, JL5215, JL6815;

The electric high lift pallet truck has model: JE5210, JE6810, JE5215, JE6815

             Manual high lift pallet truck JL series

We have this item in stock in France, if you are located in Europe, we can arrange delivery to you ASAP! This way will save your time and shipping cost.

Specifications of manual high lift skid jack truck:

Electric high lift pallet truck JE series

 

• High quality oil cylinder: The integrally sealed hydraulic cylinder can effectively avoid the disadvantages of oil leakage, improve the safety performance of the whole vehicle, lift quickly and improve work efficiency.
• Comfortable handle: Ergonomic design, the outer layer is rubberized and non-slip, the operation feels comfortable, and the drop speed of the hand-pulled pressure relief heavy cargo is controllable, which improves the operation safety.
• Exquisite workmanship: The surface of the car body has been subjected to high temperature baking paint, electrostatic spraying, the surface is smooth and smooth, durable, beautiful and corrosion-resistant.
• Anti-pinch scissors: The scissors are designed with increased spacing and anti-clamping to prevent accidental clamping of other items. Thickened steel enhances the bearing capacity, making it safer and more durable.

• La pompa e la luce estremamente facili rendono questa unità molto adatta come transpallet manuale combinato e tavola elevatrice
• Controllo automatico della velocità di discesa tramite una valvola idraulica unica, la velocità decrescente rimane sempre la stessa indipendentemente dal carrello con o senza carico. Prevenirà una rapida discesa dei danni al carico.
• Design resistente: telaio della forcella in lamiera d'acciaio da 4 mm e pistone di sollevamento più grande assicurano che il carrello raggiunga la capacità nominale.
• Molto adatto come transpallet manuale combinato e tavola elevatrice
• Le gambe di supporto anteriori e gli stabilizzatori regolabili si estendono automaticamente al pavimento quando le forche raggiungono un'altezza di 420 mm, per garantire la massima stabilità e una frenata ottimale.
• Conforme a EN1757-4.

Attenzione e manutenzione:

Non sovraccaricare;
Se è consentito utilizzare le condizioni del terreno;
Caricare correttamente la merce;
Indossare scarpe e guanti di sicurezza durante la manipolazione;
Si prega di fare un controllo completo delle operazioni prima di ogni utilizzo;
Assemblaggio della macchina con la corretta tecnica di sollevamento;
Don't overlook the potential dangers that may exist during operation.

Proper maintenance will extend the life of the truck.
Check the oil, remove air and lubricate during maintenance.
Check the oil level every six months.
The newly injected oil to the rubber container should be 5mm below the liquid level, and the fork must be at the lowest position when adding oil.
When replacing the seal, air may enter the hydraulic system, place the joystick in the LOWER position, and then swing the handle a dozen times.
Lubricate the movable part with motor oil or oil.
Also pay attention to daily inspection and maintenance.
Inspection of the truck can reduce wear as much as possible.
Special attention should be paid to the wheel, axle, handle, fork, lift and lowering control.
Whenever work is completed, the fork should be unloaded and lowered to the lowest position.